High Quality 3D Printer Filament PLA 1.75mm 3mm For White To Purple Light change filament

High Quality 3D Printer Filament PLA 1.75mm 3mm For White To Purple

Light Chnage Filament
1. The specification is 1.75 &3.0
2. The vacuum packing,The Net Weight 0.8 KG
3. Have ABS Light Change and PLA light Change.
4. Two COlors :White to Purple and White to Blue.

PLA Glow in The Dark 3d Printer Filament 1.75 / 3.0mm

1, Specifications:1.75&3.0.

2, Manner and packing: use vacuum package, the net weight1.0KG.

3, Foreign 3d printer supplies perfect support the PLA, PLA belong to biological materials, corn grain

refining, natural color can be solution, dose not affect the environment.

4, PLA material have hard, the strength and stiffness high

5, Surface light, smooth degree is very good.

6, Processing and no smell.

7, PLA print not curly and no edge warp.

8, Working temperature is low, 200°C -250°C.

9, Many color you can choose

10, Variable Temperature PLA print strips change color temperature is 31 degrees

11, Glow in The Dark Blue when filament in Dark ,can emit blue light,Glow in The Dark Green when Filament in Dark ,can emit Green light.

12, Fluorescence Color Under ultraviolet light emitting

1, Manner and packing: We use plastic tray, the net weight 1.0KG, we put desiccant in it, use

vacuum package, every Tray into a small box, and the each 8 small box into a master carton.

2, Plastic tray: diameter 160mm, axle hole32mm, overall height 90mm.the corresponding

carton35.8×35.8×22.5cm

2, Diameter 200mm, axle hole 56mm, overall height 70mm. the corresponding

carton 43.5×43.5×18cm

Applicable models: Suitable for Markerbot, RepRap,Cubify and UP 3D Printer.

Products are ready-made goods:

Quality Control :

1, All of Our 3D Printer Filament are 100% virgin material, never use recycled material or regrind

material, and all had achieved the latest REACH certificate.

2, Before the mass production, our engineer always do the test to make sure that sure that each

batch of new raw materials must be printed by 3D printer.

3, The Laser diameter runs automatically to control the diameter of the filament and keeps it in a

right range of 1.75 / 3.0mm, and our engineer will adjust it immediately when it alarms to indicate

of wrong size, and this unqualified filament will be cut off and never use it.

4, We to keep the filaments dry, each roll of filament is packed in a vacuumed poly bag with a

desiccant inside of it.

                                               Dongguan Dezhijian Plastic Electronic Ltd

 Our Factory at Waterfront industrial Zone ,Hengli Town,Dongguan City ,Guangdong Province.

  Our company since 2007 began to produce plastic strips, plastic rods, 2010 began to increase the production of 3D printing supplies. And adhering to the "focus on products, integrity services, innovation and development," the three-dimensional concept of service to customers. Now, the plant area of more than 2,000 square meters, more than 60 employees, 7 production lines, to produce capacity of 50 tons, adequate inventory. Our company's product range of up to 30 species, the color up to 60 species. We use imported green materials from the United States, and have MSDS, ROHS, FDA and other related certificates. In the production of advanced laser caliper measurement, monitoring the product diameter, strict control of production quality. Our products are exported to Europe and the United States, Southeast Asia, Africa, Australia, Japan, South Korea and other markets, products all over the world.

Dongguan Hengli Dejian Plastic Electrical Products Factory, we have do 3D Printer filament 7 years. Now we have 7 product lines. There are many kinds of materials , we have PLA,ABS,HIPS,Nylon(PA),PC,POM，PETG,PVA（Water solubility），Wood,Flexible(TPU),ConductiveABS,Glow in Dark,Fluorescence,Change color,Light Change,Flame retardant,Metal filament,Polymer composite(like silk),High temperature resistance 110℃PETG,carbonfiber,ASA,SoftPLA,MulticolorGradient,Ceramic,PC+ABS,Marble,Twinkling,PETG-Carbon Fiber ,PVB andso on.Our PLA filaments have 50 colors in stock.

Contact name:Monica Luo

WhatsApp/wechat: +86 13533633723

Skype: +86 13533633723

Facebook : keikeilaw@163.com
Factory：Dongguan Dezhijian Plastic Electronic Ltd.
Add：Hengli Town, waterfront industrial zone,Dongguan City,
Guangdong province ,China
TEL：86-0769-82857663 Fax:86-0769-82329070
TEL：86-13533633723
E-mail:monicalawkei@163.com
http//dejiandg.en.alibaba.com
https://www.abs3dprinterfilament.com