Durable MSDS PLA ABS 3d Printer Filament 5kg 0.5kg High Strength

3d printer filament PLA ABS filament 1.75mm 1kg 5kg 0.5kg for 3d printing

Filament Introduction :

• Good toughness high strength, high stiffness ;
• No block nozzle, good stick hot bed, a smooth PLA used
• Low shrinkage, thermoforming dimensional stability
• Accurate diameter: 3.0/1.75mm, variations + /-0.03mm, roundness +/-0.02mm;
• PLA filament have hard, the strength and stiffness high

Product Description

PLA melts at a relatively low temperature of about 175 degrees Celsius. Unlike so-called thermoset materials, PLA can be heated past its melting point multiple times with very little degradation. It’s a hard material, but that also means it’s somewhat brittle, and once it breaks, it likes to shatter.

The best use of PLA is for printing concept models, prototypes, miniatures, jewelry, low-wear toys, etc.

Product Feature

1). Good toughness,High strength, High stiffness
2). No block nozzle, Good stick hot bed
3). Cost-effective can be processed in wide range temperature;
4). Low shrinkage, thermoforming dimensional stability
5). Accurate diameter: 3.0/1.75mm, variations + /-0.1mm,roundness +/-0.05mm;
6). Suitable for a variety of 3D printer, Makerbot, UP, Cubify, Leapfrog, Reprap, Ultimaker, Mendel, Prusa, Huxley etc.

Product Information

Product Advantage

1. Material: Raw materials are all imported from the United State, there’s absolutely no defective, recyled raw materials or in it.
2. Weight: The net weight of Consumables is 1kg, component fully.
3. Appearance: support custom.
4. Repeated Teat Results:Compared with ordinary low consumables on the market, this material toughness stength, higther hardness, printing support artfifacts more easily removed.

                                               Dongguan Dezhijian Plastic Electronic Ltd

 Our Factory at Waterfront industrial Zone ,Hengli Town,Dongguan City ,Guangdong Province.

  Our company since 2007 began to produce plastic strips, plastic rods, 2010 began to increase the production of 3D printing supplies. And adhering to the "focus on products, integrity services, innovation and development," the three-dimensional concept of service to customers. Now, the plant area of more than 2,000 square meters, more than 60 employees, 7 production lines, to produce capacity of 50 tons, adequate inventory. Our company's product range of up to 30 species, the color up to 60 species. We use imported green materials from the United States, and have MSDS, ROHS, FDA and other related certificates. In the production of advanced laser caliper measurement, monitoring the product diameter, strict control of production quality. Our products are exported to Europe and the United States, Southeast Asia, Africa, Australia, Japan, South Korea and other markets, products all over the world.

Dongguan Hengli Dejian Plastic Electrical Products Factory, we have do 3D Printer filament 7 years. Now we have 7 product lines. There are many kinds of materials , we have PLA,ABS,HIPS,Nylon(PA),PC,POM，PETG,PVA（Water solubility），Wood,Flexible(TPU),ConductiveABS,Glow in Dark,Fluorescence,Change color,Light Change,Flame retardant,Metal filament,Polymer composite(like silk),High temperature resistance 110℃PETG,carbonfiber,ASA,SoftPLA,MulticolorGradient,Ceramic,PC+ABS,Marble,Twinkling,PETG-Carbon Fiber ,PVB andso on.Our PLA filaments have 50 colors in stock.

Contact name:Monica Luo

WhatsApp/wechat: +86 13533633723

Skype: +86 13533633723

Facebook : keikeilaw@163.com
Factory：Dongguan Dezhijian Plastic Electronic Ltd.
Add：Hengli Town, waterfront industrial zone,Dongguan City,
Guangdong province ,China
TEL：86-0769-82857663 Fax:86-0769-82329070
TEL：86-13533633723
E-mail:monicalawkei@163.com
http//dejiandg.en.alibaba.com
https://www.abs3dprinterfilament.com